How to configure switches for Grid 3 on an EM-12

mai 07, 2019

Configure Switches In Grid 3 on a Em-12 device
 
Switches can be used for both Gaze Interaction and Scanning. The switches must be plugged into the device and set up as “Keyboard” keys.

Set up a switch in Grid 3
  1. In Grid 3, select the Menu bar
  2. Select Settings.
  3. Select Access.
  4. Select Switches
  5. Select Connection
  6. Select the drop-down menu and choose Keyboard.
  7. Select Switch 1 in the list.
  8.  Select Change Key
  9. Activate the switch that is plugged into Switch Port 1. The menu will close and return to the list of switches. Switch 1 will now read “F13.”
Note: If a second switch needs to be set up, follow the same steps above but use the switch plugged into Switch Port 2 in step 9

.
Use the switch for Gaze Interaction in Grid 3
  1.  In Grid 3, select the Menu bar.
  2.  Select Settings.
  3. Select Access.
  4. Select Eye Gaze.
  5. Select the Activate drop-down menu.
  6. Select Press switch to click.
  7.  Select the drop-down menu and choose Switch 1 from the list.